Highly Selective Copper‐Catalyzed Asymmetric [3+2] Cycloaddition of Azomethine Ylides with Acyclic 1,3‐Dienes

The first examples of the catalytic asymmetric 1,3‐dipolar cycloaddition of azomethine ylides with acyclic activated 1,3‐dienes (and 1,3‐enynes) are described. Under copper catalysis, a selective cycloaddition at the terminal γ,δ‐C?C bond is observed. In addition, depending on the ligand used, either the exo or the endo adduct can be obtained with high selectivity. Under appropriate reaction conditions, the acyclic 1,6‐addition product is detected, suggesting a stepwise mechanism. The resulting C4‐alkenyl‐substituted pyrrolidines are suitable substrates for further access to polycyclic systems, as highlighted by the preparation of hexahydrochromeno[4,3‐b]pyrrole and the tetracyclic core of the alkaloid gracilamine.     

Beyond Stereoselectivity,Switchable Catalysis: Some of the Last Frontier Challenges in Ring‐Opening Polymerization of Cyclic Esters

Metal‐based catalysts and initiators have played a pivotal role in the ring‐opening polymerization (ROP) of cyclic esters, thanks to their high activity and remarkable ability to control precisely the architectures of the resulting polyesters in terms of molar mass, dispersity, microstructure, or tacticity. Today, after two decades of extensive research, the field is slowly reaching maturity. However, several challenges remain, while original concepts have emerged around new types or new applications of catalysis. This Review is not intended to comprehensively cover all of these aspects. Rather, it provides a personal overview of the very recent progress achieved in some selected, important aspects of ROP catalysis—stereocontrol and switchable catalysis. Hence, the first part addresses the development of new metal‐based catalysts for the isoselective ROP of racemic lactide towards stereoblock copolymers, and the use of syndioselective ROP metal catalysts to control the monomer sequence in copolymers. A second part covers the development of ROP catalysts—primarily metal‐based catalysts, but also organocatalysts—that can be externally regulated by the use of chemical or photo stimuli to switch them between two states with different catalytic abilities. Current challenges and opportunities are highlighted.     

Guanidine‐Based Polymer Brushes Grafted onto Silica Nanoparticles as Efficient Artificial Phosphodiesterases

Polymer brushes grafted to the surface of silica nanoparticles were fabricated by atom‐transfer radical polymerization (ATRP) and investigated as catalysts in the cleavage of phosphodiesters. The surfaces of silica nanoparticles were functionalized with an ATRP initiator. Surface‐initiated ATRP reactions, in varying proportions, of a methacrylate moiety functionalized with a phenylguanidine moiety and an inert hydrophilic methacrylate species afforded hybrid nanoparticles that were characterized with potentiometric titrations, thermogravimetric analysis, and SEM. The activity of the hybrid nanoparticles was tested in the transesterification of the RNA model compound 2‐hydroxypropyl para‐nitrophenylphosphate (HPNP) and diribonucleoside monophosphates. A high catalytic efficiency and a remarkable effective molarity, thus overcoming the effective molarities previously observed for comparable systems, indicate the existence of an effective cooperation of the guanidine/guanidinium units and a high level of preorganization in the nanostructure. The investigated system also exhibits a marked and unprecedented selectivity for the diribonucleoside sequence CpA. The results presented open up the way for a novel and straightforward strategy for the preparation of supramolecular catalysts.     

Nickel‐Promoted Highly Regioselective Carboxylation of Aryl Ynol Ether and Its Application to the Synthesis of Chiral β‐Aryloxypropionic Acid Derivatives

Nickel(0)‐promoted carboxylation of aryl ynol ether proceeded in a highly regioselective manner to produce α‐substituted‐β‐aryloxyacrylic acid derivatives. The α‐substituted‐β‐aryloxyacrylic acids were transformed into the corresponding β‐aryloxypropionic acid derivative as an optically active form via rhodium‐catalyzed asymmetric hydrogenation.     

Postsynthetic Metal and Ligand Exchange in MFU‐4l: A Screening Approach toward Functional Metal–Organic Frameworks Comprising Single‐Site Active Centers

The isomorphous partial substitution of Zn²⁺ ions in the secondary building unit (SBU) of MFU‐4l leads to frameworks with the general formula [M_xZn_(5–x)Cl₄(BTDD)₃], in which x≈2, M=Mn^II, Fe^II, Co^II, Ni^II, or Cu^II, and BTDD=bis(1,2,3‐triazolato‐[4,5‐b],[4′,5′‐i])dibenzo‐[1,4]‐dioxin. Subsequent exchange of chloride ligands by nitrite, nitrate, triflate, azide, isocyanate, formate, acetate, or fluoride leads to a variety of MFU‐4l derivatives, which have been characterized by using XRPD, EDX, IR, UV/Vis‐NIR, TGA, and gas sorption measurements. Several MFU‐4l derivatives show high catalytic activity in a liquid‐phase oxidation of ethylbenzene to acetophenone with air under mild conditions, among which Co‐ and Cu derivatives with chloride side‐ligands are the most active catalysts. Upon thermal treatment, several side‐ligands can be transformed selectively into reactive intermediates without destroying the framework. Thus, at 300 °C, Co^II‐azide units in the SBU of Co‐MFU‐4l are converted into Co^II‐isocyanate under continuous CO gas flow, involving the formation of a nitrene intermediate. The reaction of Cu^II‐fluoride units with H₂ at 240 °C leads to Cu^I and proceeds through the heterolytic cleavage of the H₂ molecule.     

Electrocatalytic Carbon Dioxide Reduction by Using Cationic Pentamethylcyclopentadienyl–Iridium Complexes with Unsymmetrically Substituted Bipyridine Ligands

Eight [Ir(bpy)Cp*Cl]⁺‐type complexes (bpy= bipyridine, Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl) containing differently substituted bipyridine ligands were synthesized and characterized. Cyclic voltammetry (CV) of the complexes in Ar‐saturated acetonitrile solutions showed that the redox behavior of the complexes could be fine tuned by the electronic properties of the substituted bipyridine ligands. Further CV in CO₂‐saturated MeCN/H₂O (9:1, v/v) solutions showed catalytic currents for CO₂ reduction. In controlled potential electrolysis experiments (MeCN/MeOH (1:1, v/v), E_app=?1.80 V vs Ag/AgCl), all of the complexes showed moderate activity in the electrocatalytic reduction of CO₂ with good stability over at least 15 hours. This electrocatalytic process was selective toward formic acid, with only traces of dihydrogen or carbon monoxide and occasionally formaldehyde as byproducts. However, the turnover frequencies and current efficiencies were quite low. No direct correlation between the redox potentials of the complexes and their catalytic activity was observed.     

Immobilized Catalysts for Iridium‐Catalyzed Allylic Amination: Rate Enhancement by Immobilization

The first immobilized catalyst for Ir‐catalyzed asymmetric allylic aminations is described. The catalyst is a cationic (π‐allyl)Ir complex bound by cation exchange to an anionic silica gel support. Preparation of the catalyst is facile, and the supported catalyst displayed considerably enhanced activity compared with the parent homogeneous catalyst. Up to 43 consecutive amination runs were possible in recycling experiments.     

“(Diphosphine)Nickel”‐Catalyzed Negishi Cross‐Coupling: An Experimental and Theoretical Study

The use of a strongly donating “(bis‐dialkylphosphine)Ni” fragment promotes the catalytic coupling of a large range of ArCl and ArZnCl derivatives under mild conditions. Stoichiometric mechanistic investigations and DFT calculations prove that a Ni⁰/Ni^II cycle is operative in this system.     

Fabrication and microstructural characterization of functionally graded porous acrylonitrile butadiene styrene and the effect of cellular morphology on creep behavior

The ability to control material properties in space and time for functionally graded viscoelastic materials makes them an asset where they can be adapted to different design requirements. The continuous microstructure makes them advantageous over conventional composite materials. Functionally graded porous structures have the added advantage over conventional functionally graded materials of offering a significant weight reduction compared to a minor drop in strength. Functionally graded porous structures of acrylonitrile butadiene styrene (ABS) had been fabricated with a solid‐state constrained foaming process. Correlating the microstructure to material properties requires a deterministic analysis of the cellular structure. This is accomplished by analyzing the scanning electron microscopy images with a locally adaptive image threshold technique based on variational energy minimization. This characterization technique of the cellular morphology is analyst independent and works very well for porous structures. Inferences are drawn from the effect of processing on microstructure and then correlated to creep strain and creep compliance. Creep is strongly correlated to porosity and pore sizes but more associated to the size than to porosity. The results show the potential of controlling the cellular morphology and hence tailoring creep strain/compliance of ABS to some desired values. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 795–803